Rolling Out Zita to Your Congregation
Last updated: September 28, 2026
This plan is for a Super Admin bringing an entire congregation onto Zita at once — replacing an existing spreadsheet or paper schedule rather than starting from nothing. If your church is small, or you’re adding people gradually rather than switching everyone over on a set date, you likely don’t need this — just work through the Setup Guide and invite people as you go.
This plan is based on a real rollout performed at a full-scale parish. The key idea is to bring guild leads on board and get their rosters right before anyone else joins, then introduce Zita to each guild’s members on their own terms rather than with one congregation-wide announcement. Treat the pacing as a starting point — a smaller church can move through these steps faster; a larger one may want more time between them.
Before You Start
- Complete the technical setup in the Setup Guide — your church, guilds, roles, and service calendar should already be in Zita before you tell anyone else about it.
- Decide who’s coordinating the rollout day to day. This is usually the Super Admin, sometimes alongside one technically comfortable Admin.
- Identify anyone who doesnt have a Mac, iPhone or iPad singed into iCloud — Zita requires one for every user. Church setup can be done on Mac or iOS, though a Mac is a bit easier for the initial walkthrough if the Super Admin has one available. Decide now who will be the designated support contact for guild leads who can’t use the app themselves — someone who can enter their unavailability and schedule changes on their behalf.
Overview
| Step | What Happens |
|---|---|
| 1. Kickoff to guild leads | Introduce Zita to guild leads only, ahead of anyone else. |
| 2. Invite & onboard guild leads | Add and invite guild leads; once they’re in, confirm each guild’s member list and roles before anyone else joins. |
| 3. Per-guild member kickoff | Each guild gets its own kickoff email to its own members, with their guild lead included. |
| 4. Invite & onboard members | Add and invite guild members; get them installed and connected. |
| 5. Transition week | Run Zita and your old system in parallel. |
| 6. Cutover | Retire the old system; Zita becomes the only schedule. |
Step 1 — Kickoff to Guild Leads
Send the kickoff email to guild leads only (template below) — not to members yet. This gives leads a heads-up and a chance to raise questions before they’re actually invited.
Step 2 — Invite & Onboard Guild Leads
- Add all guild leads to Zita, designate them as Guild Leads on their person records, and send their invitations.
- Confirm each guild lead has a Mac, iPhone, or iPad signed in to iCloud, or knows they’ll rely on your designated support contact.
- Once a guild lead is set up, work with them to confirm their guild’s full member list and role assignments — get this right now, before that guild’s members are invited, so the roster is accurate from the moment members join.
Step 3 — Per-Guild Member Kickoff
Rather than one congregation-wide announcement, send each guild its own kickoff email (template below), addressed to that guild’s members with their guild lead included. This keeps the message specific to that guild and gives the lead visibility into what their own members are being told.
Step 4 — Invite & Onboard Guild Members
- Add each guild’s members to Zita — one at a time or via CSV import for a larger roster (see “Importing People from a Spreadsheet” in the Setup Guide).
- Send invitations to guild members.
- Follow up individually with guild leads about any members who don’t have an Apple device.
- Copy existing assignments from your old system into Zita as members come on board.
Step 5 — Transition Week
Once everyone’s onboarded, run both systems in parallel for a week so nothing falls through the cracks at cutover.
- Email guild leads (template below): schedule changes need to be made in both Zita and the old system this week.
- Reconfirm the process for making changes in both systems, including for anyone who relies on the designated support contact.
- Post the new schedule from Zita alongside the old one, so members get used to checking it before it becomes the only source.
Step 6 — Cutover
- Turn off (or stop updating) the old system.
- Post the schedule from Zita as the single source of truth going forward.
- Treat this as a support week — expect questions as people get used to the new system. Point people to your Facebook group, and make sure anyone without an Apple device knows who their designated support contact is for hands-on help.
After Cutover
Ongoing management from here is covered in the Administration Guide. Day-to-day questions from guild leads and members belong in the Facebook group rather than a written guide — see “New to Zita — start here,” pinned there.
Email Templates
Guild leads get operational detail and action items; members get something short and benefit-forward, specific to their own guild. Fill in the bracketed details for your church.
Step 1 — Kickoff Email to Guild Leads
Subject: We’re moving to Zita for scheduling
Hi all,
What’s happening: Starting [target cutover date], [Church Name] is moving guild scheduling from [old system] to Zita, an app built specifically for church guild scheduling. You’ll build your team’s schedule and manage assignments there instead of [old system].
What we need from you: Confirm you have a Mac, iPhone, or iPad signed in to iCloud. Any of those works for using Zita. If you don’t have any of them, let us know — we have a process ready for that too. You’ll get an invitation from us shortly, and once you’re set up, we’ll work with you to confirm your guild’s member list and roles before your members are invited.
What to expect: Your members won’t be invited until your guild’s roster is confirmed with you, so there’s no rush — we’ll walk through it together. After that, there’s a short transition week where you’ll keep both [old system] and Zita updated, before we turn [old system] off for good. Questions any time — reach out to [contact / Facebook group link].
Step 3 — Per-Guild Kickoff Email to Members
Subject: [Guild Name] is moving to Zita
Hi [Guild Name] team,
What’s happening: [Church Name] is moving guild scheduling to Zita, a new app that makes it easy to see your upcoming assignments, mark yourself unavailable, and request a sub, right from your iPhone, iPad, or Mac. [Guild Lead Name] has already been using it to get your guild’s roster set up.
What to expect: You’ll get a separate invitation email with a link. Tap it, install Zita from the App Store if you don’t already have it, and you’re in — that’s the whole process.
What you need to do: Make sure your iPhone, iPad, or Mac is signed in to iCloud (most are). If you’re not sure, or don’t have an Apple device, let [Guild Lead Name] or [contact] know and we’ll help you get set up before your invitation arrives.
Step 5 — Transition Week Email to Guild Leads
Subject: This week — please update both [old system] and Zita
Hi all,
We’re one week out from cutover on [cutover date]. Through this coming Sunday, please make any schedule changes in both [old system] and Zita, so nothing gets lost when we turn [old system] off. Starting [cutover date], Zita becomes the only schedule — please post from there going forward. If you don’t have an Apple device, keep sending changes to [designated support contact] as usual and they’ll enter them for you.
Thanks for bearing with the double bookkeeping for one more week — reach out to [contact] with any questions.
For technical setup, see the Setup Guide. For ongoing administration, see the Administration Guide. For day-to-day questions, ask in our Facebook group.
