Zita Setup Guide
Last updated: September 28, 2026
Start here to get your church set up in Zita.
Introduction
This guide is for anyone with administrator access to your church in Zita — the Super Admin and any Admins they designate.
The Super Admin is whoever (will) set up the church. They own the church’s data in Zita, and they’re the only person who can see the Billing tab, manage the subscription, and send invitations to new people — Apple’s iCloud sharing only allows the account that owns the church’s data to add new participants. In many churches, the Super Admin is a treasurer, a technically comfortable volunteer, or whoever handled getting Zita installed — not necessarily the person who will manage it day-to-day.
Admins are designated by the Super Admin after onboarding. They have full access to everything except Billing and sending invitations. A common pattern is to designate a clergy member as one Admin — so they can review and maintain the liturgical calendar and service details — and a parish administrator, secretary, or guild leader as another, to handle membership and scheduling.
Once the Super Admin completes onboarding and designates their Admins, the Admin team takes over the management work: keeping services accurate, maintaining the member directory, and managing guild structure. Day-to-day scheduling is handled by guild leads, and members manage their own availability. This guide covers the Super Admin and Admin roles together, noting where they differ.
Getting through onboarding itself takes about 5–10 minutes. The follow-on work — reviewing services, adding members, assigning roles, and sending invitations — takes longer and will depend on the size of your church and how many guilds you’re setting up.
Curious before you commit? From the same welcome screen described in Step 1 below, anyone can tap Try Zita to explore a fully-populated sample church — no setup and nothing saved. It’s a good way to click around the app, or to show a co-admin what they’re signing up for, before you set up your real church. Nothing you do in Try Zita affects your real data, and it resets every time you open it.
A Suggested Division of Responsibility
Zita gives you flexibility in how you divide admin work. While all of these roles are simply called Admin, here’s a pattern outlining responsibilities that works well for most churches:
- The Liturgical Admin — typically a member of the clergy. This person owns the service calendar. They verify mass types, vestment colors, and the service list after onboarding, and they’re responsible for keeping clergy and staff assignments up to date going forward. Parts 2, 3, and 8 are primarily theirs.
- The Guild Admin — typically a parish administrator, secretary, or experienced guild lead. This person owns the guild structure and membership. They set up roles, add members, assign people to guilds, and send group communications. Parts 4, 5, 6, and 7 are primarily theirs.
- The Super Admin — typically whoever set up Zita on behalf of the church. This person owns the data and the subscription. Their main job is onboarding, designating the other Admins, sending invitations once people have been added, and managing billing if the church grows beyond the free tier. Part 1 and the Billing section are theirs.
These don’t have to be three different people — in a smaller church, one or two people may cover all of it. But naming these roles upfront helps everyone know where their work lives.
Part 1 — Onboarding (Super Admin)
Onboarding is a short wizard that walks you through creating your church in Zita. You’ll only do this once. When it’s done, your church, your personal account, and your liturgical calendar will all be created together.
Recovering a church that used Zita before? If your church has an existing Zita data export (or lost access to the original Super Admin’s account), skip the steps below — see “Recovering a Previous Church’s Data” in the Zita Administration Guide instead. The rest of this guide assumes you’re starting fresh.
Before You Begin
Before you open Zita for the first time, it helps to have a few things on hand:
- An iCloud account. Zita doesn’t have its own sign-in. It uses the iCloud account your device is already signed into, and your church’s data is stored in that account’s iCloud. Make sure you’re signed in with the account that should own your church. Anyone you invite later just needs to be signed in to iCloud on their own device.
- Your church name, and your own name and email address. These are entered during setup and become your Super Admin record.
- A rough sense of your guilds. Zita will walk you through selecting guilds during setup — Altar Guild, Acolytes, Ushers, and so on. You don’t need a final list, but having a general picture in mind will make setup faster.
You don’t need your full membership list yet. You’ll add people after setup is complete.
Step 1 — Choose “Set Up a New Church” and Confirm your iCloud Account
Open Zita. It first checks that your device is signed in to iCloud and whether a church has already been shared with you. If you’ve been invited to a church, Zita takes you straight in. If you see the welcome options (open an invitation link, Set Up a New Church, and Try Zita), you’re starting fresh. Tap Set Up a New Church. You can do this on a Mac, iPhone, or iPad. A Mac is a little easier for the guided setup and the batch creation in Step 6, simply because of the larger screen.
The next screen shows your device’s iCloud status and asks Which iCloud account should own your church? Zita uses the iCloud account this device is signed into. There’s no separate username or password. If you’re not sure which account that is, tap Check or Switch Account to open your device’s Apple Account settings. When you’re ready, tap Continue with This Account.
The account you use here becomes the Super Admin account, and your church’s data lives in its iCloud. Choose wisely: this should be someone with a long-term relationship with the church and an Apple Account they’ll keep using. Some churches prefer a shared institutional Apple Account, for example on a church-owned Mac, rather than one person’s personal account, so ownership doesn’t hinge on a single individual staying reachable.
Step 2 — Church Details
Enter your church’s full name — this appears throughout the app and in invitations, so use the name you’d want members to see. You’ll also enter your own name and email address here, which creates your Super Admin person record.
Step 3 — Choose Your Guilds
Zita will show you a list of common guilds — Altar Guild, Acolytes, Ushers, and others. Select the ones that apply, and if a guild you need isn’t on the list, you can add it right here. The goal is a reasonable starting point, not a perfect one. Everything can be adjusted after setup.
Default guilds: Altar Guild, Flower Guild, Lectors, Ushers, Acolytes.
Step 4 — Choose Your Roles
For each guild you selected, Zita suggests common roles. Select the ones that apply, and add any that are missing. As with guilds, the goal here is reasonable, not perfect — roles are fully editable after setup.
Step 5 — Liturgical Calendar
Zita will generate a full year of services based on the liturgical calendar. A few things to know:
- Mass type defaults to blank as the default except for Easter and Christmas, which are Solemn High.
- Vestment colors follow the traditional liturgical calendar, including rose for Gaudete and Laetare Sundays.
- For each day of the week you select, you’ll also set a default start and end time for services on that day. These become the day’s standard service time — they’re used to pre-fill times when you generate more services later and when you set up Service Types (Part 3), so it’s worth getting them right now even though every individual service can still be adjusted afterward.
Every service is editable after setup. Getting the calendar reviewed and corrected is one of the first things your clergy Admin will want to do.
It’s better here to do too few services than too many. Once the records are generated, they will each have to be deactivated individually, so stick with days of the week when you have weekly services only to start.
Step 6 — Finish
Review the summary and tap Finish. Zita will create everything at once — your church record, your account, your guilds and roles, and your calendar. You’ll land on the main app ready to go.
Ready to Hand Off?
If you set up Zita on behalf of your church but someone else will be administering it day-to-day, now is the time to make that handoff. Here’s the recommended approach:
- Go to Admin → People and add your Admins as people.
- Send each of them an invitation from their person record — this is a Super Admin-only step (see “Sending Invitations” in the Administration Guide).
- Let them take it from here.
A clergy Admin is the right person to review and correct the liturgical calendar and service details. Another Admin (guild and membership admin) — a secretary, parish administrator, or technically comfortable volunteer — can start building out the membership list. The rest of this guide is written for whoever is doing that ongoing work, whether that’s you or your Admins.
Part 2 — Review Your Services (Liturgical Admin)
The liturgical calendar Zita generated during onboarding is a starting point. Before invitations go out and scheduling begins, someone — ideally your clergy Admin — should work through the service list and make sure everything is accurate.
Go to Admin → Services to see all your services.
What to Check
- Liturgical day names. Zita generates services based on standard liturgical day names, based on the Churchman’s Ordo. Verify that the names match what your church uses — some parishes have local conventions or traditions that differ from the defaults.
- Vestment colors. Colors are assigned automatically based on the liturgical calendar, including rose for Gaudete and Laetare Sundays. Verify anything that looks unexpected.
- Services you don’t hold. If your church doesn’t celebrate certain services — a particular weekday Mass, a minor feast — you can deactivate them rather than delete them. Deactivated services won’t appear in scheduling.
- Mass types. The defaults are Solemn High for Easter Day, Easter Vigil, and Christmas Day; the rest are left blank. If your church observes different types for particular services, tap into the service and change it.
- Start and end times. Each service can carry a start and end time, shown throughout the app (the scheduling grid, My Info, calendar exports). These are pre-filled from the day-of-week defaults you set during onboarding (or from a Service Type’s own defaults — see Part 3) the first time you open a service that doesn’t have a time yet; edit them per service as needed.
- Notes. The notes field on each service is a good place to record anything the scheduling team should know — a visiting celebrant, a special observance, the name of the deceased for a funeral. Notes are visible to Admins only.
Editing a Service
- Go to Admin → Services.
- Tap the service you want to edit.
- Change any fields — liturgical day name, mass type, vestment color, start/end time, flowers, or notes. Changes save automatically.
Adding a Service
If your church holds services that weren’t generated by the calendar, you’ll need to add them manually. A common example: if Christmas Day falls on a Monday and your church doesn’t hold a regular Monday Mass, Zita won’t generate a Christmas service automatically — you’ll need to add it yourself. The same applies to special services like a Requiem, an evening prayer, a wedding, or a patronal feast that isn’t part of your regular schedule.
- Go to Admin → Services.
- Tap + in the toolbar.
- Set the date, then tap Liturgical Day to choose from the calendar or enter a custom name.
- Set the mass type, vestment color, and start/end time.
- Add a note if needed.
- Tap Save. The service will appear in the list and in the scheduling grid immediately.
It’s worth scanning your calendar for exactly this situation — major feasts falling on days your church doesn’t normally hold services — before scheduling begins.
Deactivating a Service
Services are never deleted in Zita — they’re deactivated. A deactivated service disappears from scheduling but its history is preserved. You can reactivate it at any time from the service detail view. Deactivated services are in a section at the bottom of the service list.
- Go to Admin → Services.
- Tap the service you want to deactivate.
- Scroll to the bottom and toggle Active off.
Clergy Assignments
One more thing to know about services: clergy assignments live in the service detail view, not in the scheduling grid. The celebrant, deacon, preacher, and any other clergy or staff roles are assigned here, service by service. The scheduling grid handles guild volunteers; service details handle clergy.
Guild leads won’t see clergy assignments in the scheduling grid, but they will see the mass type and vestment color for each service. Those details matter for guild work — an acolyte lead needs to know if it’s a Solemn High or a Low Mass; the altar guild needs the correct color. Getting services accurate before invitations go out means your guild leads are working with the right information from day one.
We’ll come back to clergy assignments in the Administration Guide, once your people are in the system.
Part 3 — Define Your Service Types (Liturgical Admin)
During onboarding, Zita automatically created a Service Type called Main Service and applied it to every service on your generated calendar. Main Service is set up with every role you set up for your guilds and clergy/staff, so your scheduling grid looks and works exactly as you’d expect, with nothing extra to configure — it’s already set up and already in use on your services.
Service Types become useful when some of your services need fewer or different roles than your main services do — most commonly, a smaller weekday or chapel service. For example, if your church holds a small chapel Mass that only needs a Celebrant and one Acolyte rather than your full complement of guilds, set up a separate Service Type for it before you add or generate those services.
Creating a Service Type
- Go to Admin → Service Types.
- Tap + to create a new type and give it a name — for example, “Small Chapel Mass.”
- Select the type, then check off just the roles it actually needs. For a small chapel Mass, that might be only Celebrant and Acolyte.
- Optionally, set a default start/end time for each day of the week this type runs — these pre-fill the time fields whenever you generate or add a service of this type.
- If your guilds maintain Service Guides or Checklists (see Part 7), you can also link the ones that should apply by default to every service of this type.
Using Service Types
Assign your new Service Type to a service from that service’s detail view, or select it when generating a batch of services at once (for example, all your weekday chapel Masses). Services using it will only show the roles you checked; everything else continues using Main Service and shows every role as before.
Set up any additional Service Types you need before creating or generating the services that use them. If you generate services first and set up the type afterward, you’ll need to go back and assign the type to each service individually.
Part 4 — Set Up Your Guilds (Guild Admin)
With your services in order, the next step is making sure your guild structure is right before you start adding people. This means verifying that each guild has the correct roles and the right number of slots per role.
Go to Admin → Guilds to see your guilds.
What to Check
- Role names. Zita suggested role names during onboarding. If your church uses different names — “Cross Bearer” instead of “Crucifer” — now is the time to adjust them.
- Slot counts. Each role has a slot count — the number of people scheduled to fill that role per service. A Torch Bearer role might have two slots; a Crucifer might have one. Check that the slot counts match what your church typically schedules.
- Missing roles. If a role wasn’t in the onboarding list and you didn’t add it manually, add it now. Roles added here will automatically appear in the scheduling grid for all future services.
- Guilds you don’t use. If a guild doesn’t apply to your church, deactivate it. Deactivating a guild removes it (and its roles) from scheduling and hides it throughout the app, but preserves any historical data. Deactivated guilds are at the bottom of the list of guilds.
A note on clergy and staff roles: Celebrant, Deacon, and Organist are set up separately, under Admin → Clergy & Staff Roles, not here — see the note at the end of this Part.
Editing a Role
- Go to Admin → Guilds.
- Select the guild containing the role.
- Tap the role you want to edit.
- Update the name or slot count. Changes save automatically.
Adding a Role to a Guild
- Go to Admin → Guilds.
- Select the guild you want to edit.
- Tap + to add a new role.
- Enter the role name and set the slot count.
The role will appear immediately in the scheduling grid for all upcoming services.
Deactivating a Role
If a role no longer applies, deactivate it rather than deleting it. Past assignments to that role are preserved.
- Go to Admin → Guilds.
- Select the guild containing the role.
- Tap the role you want to deactivate.
- Toggle Active off.
Deactivating a Guild
- Go to Admin → Guilds.
- Select the guild you want to deactivate.
- Toggle Active off.
The guild will be removed from scheduling and hidden throughout the app. All historical data is preserved and the guild can be reactivated at any time.
Managing Clergy & Staff Roles
Celebrant, Deacon, and Organist are created for you during onboarding, but they live in their own section — Admin → Clergy & Staff Roles — separate from your guild roles, since they aren’t tied to any guild. Go there to add, rename, or deactivate a clergy or staff role (for example, adding “Subdeacon” or “Thurifer” if your church uses one). This only manages the roles themselves; assigning a specific person to one on a specific service happens in that service’s detail view (see Part 2).
Part 5 — Add Your People (Guild Admin)
With your guilds and roles in place, you’re ready to start adding people. Go to Admin → People to see your member list and add new people.
There’s no required order for adding people — add them however feels natural. Some admins work from a printed directory; others add people guild by guild. For a larger roster, you can also import everyone at once — see “Importing People from a Spreadsheet” below.
Person Types
Every person in Zita has a type. The most important difference between types is how they appear in service assignments: only Clergy and Staff can be assigned to the clergy and staff roles on a service — celebrant, deacon, preacher, and so on. Members are assigned through the scheduling grid by guild and role.
- Member. A regular volunteer or parishioner. Members belong to guilds, are assigned to roles, and are scheduled through the scheduling grid.
- Clergy. A priest, deacon, or other ordained minister. Clergy have a title field and are available for assignment to clergy and staff roles on each service.
- Staff. A paid or unpaid staff member — an organist, sexton, or parish administrator, for example. Staff also have a title field and are available for assignment to clergy and staff roles on each service.
App Roles
In addition to their type, every person has an App Role that controls what they can do in Zita.
- Standard. The default for everyone. Standard users can view the scheduling grid, manage their own availability, and self-assign to roles they belong to.
- Admin. Full access to manage people, guilds, roles, and services. Can see and edit everything except Billing and sending invitations. A church can have up to 5 Admins.
- Super Admin. Assigned automatically to whoever set up the church. Identical to Admin, with the addition of Billing access and the ability to send invitations. There is exactly one Super Admin per church.
App Roles are set from the person’s detail record and can be changed at any time.
Adding a Person
- Go to Admin → People.
- Tap + and choose Member, Clergy, or Staff.
- Enter their first name, last name, and email address.
- For Clergy and Staff, add a title if applicable.
The person is saved immediately and appears in the member list.
About the email address you enter here: Zita sends the invitation to this address and uses it to match the person to their record when they accept, so use the address they’ll actually open the invitation from. If it doesn’t match, they can still get in. An admin just confirms them from Admin → Needs Linking (see Part 8).
Guild Leads
If the person you just added is a guild lead, designate them now while you’re already in their record.
- Scroll down to the Guild Lead section on their record.
- Check the box next to the guild they lead.
A person can lead more than one guild if needed. Getting guild leads designated before invitations go out means they’ll have scheduling access the moment they log in.
Importing People from a Spreadsheet
If you’re bringing over a large roster, you can import people from a CSV file instead of adding them one by one.
- Go to Admin → People.
- Tap the + menu and choose Import Members and Guild Roles from CSV…
- Follow the wizard to map your file’s columns to first name, last name, and email address, plus (optionally) guild role columns if your spreadsheet already groups people by role.
- Review the preview table before committing.
This can create new People (matched and de-duplicated by email) and, if you’ve mapped role columns, assign them to guild roles in the same pass. It never creates a duplicate for someone who already matches an existing person by email.
If you only need to assign existing people to guild roles from a spreadsheet — not add new people — a scoped version of the same import is available from Admin → Guilds via Import Guild Role Members from CSV…, which matches by email against people already in Zita and adds roles, without ever creating a new person record.
Designating an Admin
- Go to Admin → People.
- Tap the person you want to designate as Admin.
- In the Permissions & Status section, change their App Role to Admin.
A Note on Clergy
It’s a good idea to designate at least one member of the clergy as an Admin. Clergy assignments on services — celebrant, deacon, preacher — can only be managed by Admins, and having a clergy person with Admin access means they can keep their own assignments up to date without routing everything through someone else.
Deactivating a Person
People are never deleted in Zita — they’re deactivated. When you deactivate someone, they’re removed from all future service assignments, but their history is preserved. Deactivated persons are in a section at the bottom of the persons list.
- Go to Admin → People.
- Tap the person you want to deactivate.
- In the Permissions & Status section, toggle Active off.
- Confirm the deactivation when prompted.
Part 6 — Assign Members to Roles (Guild Admin)
This is where your guild structure comes to life. Assigning members to roles is what makes the scheduling grid work — a person won’t appear as an option when scheduling a service unless they’re a member of the relevant role. Take your time here; getting this right upfront means scheduling becomes fast and straightforward.
Go to Admin → Guilds to work through your guilds one by one.
How Role Membership Works
Each guild has a set of roles, and each role has a pool of members who are eligible to fill it. When a guild lead or admin opens the assignment picker for a service, they’ll see exactly the people who belong to that role — no one else. A person can belong to multiple roles within the same guild, and to roles across different guilds.
This is the connection that makes scheduling meaningful. Until a person is assigned to a role, they’re invisible to the scheduling grid for that role.
Assigning Members to a Guild
- Go to Admin → Guilds.
- Select a guild.
- Under Members, tap +.
- Check off which of the guild’s roles this batch of people should get.
- Search for and check off everyone who should get those roles — you can select several people at once.
- Tap Add Roles to Selected Members. Everyone selected is added to every role you checked, skipping anyone who already has a given role so you can safely re-run this for overlapping groups.
A Member in Multiple Roles
If a person fills more than one role in a guild — an usher who also serves as a greeter, for example — just check both roles when you add them. You can always come back and update their roles from the guild’s Members section.
A Member in Multiple Guilds
A person can belong to more than one guild. If someone serves in both the Altar Guild and as a Lector, add them to each guild separately. They’ll appear as an option in the scheduling picker for each guild and role they belong to.
Removing a Member from a Role
If you add someone to the wrong role, or their role changes, you can remove them.
- Go to Admin → Guilds.
- Select the guild, then find the member under Members.
- Right-click (or long-press) the person’s name and choose Remove from Role.
Their past assignments are preserved. They’ll no longer appear in the scheduling picker for that role going forward.
Guild Leads
Guild leads should already be designated from their person record in Part 5. If you skipped that step, you can also toggle it right here: right-click a member’s name under any role and choose Guild Lead from the menu.
Part 7 — Guides, Checklists, and Inventory (Guild Admin)
The Guilds tab (visible to everyone) is where each guild keeps its reference material and supplies. Select a guild from the sidebar, then use the segmented control at the top to switch between four things:
- Items — inventory: altar linens, candles, bulletins, flowers, whatever your guild needs to keep stocked.
- Guides — reusable “how we set this up” documents with instructions and photos, for a specific kind of service (a Christmas Eve altar setup guide, a Palm Sunday guide).
- Members — a read-only roster of everyone with a role in that guild, useful for a guild lead who wants to see their whole team without digging through Admin.
- Checklists — reusable task lists (e.g., “light the charcoal,” “fold the funeral pall”) that get filled out, item by item, each time they’re actually used for a real service — a running record of who did what and what got skipped, not just a static list.
Everyone can view all four; only Admins and that guild’s own leads can add or edit Items, Guides, and Checklists.
Setting Up Inventory
- Go to the Guilds tab and select a guild.
- Switch to Items, then tap Add Item in the toolbar.
- Fill in the item name, Units on Hand and Singles on Hand (for example, if candles come in boxes of 12, a “unit” is a box and “singles” are loose candles outside a full box), Unit and Count Per Unit, a Reorder Threshold, and vendor details if you order from a specific supplier.
Zita calculates Total on Hand automatically and shows a status badge — Good, Getting Low, or Low — based on your reorder threshold. Use Manage Categories in the toolbar to group related items (Candles, Linens, Bulletins).
Setting Up Guides
- Go to the Guilds tab, select a guild, and switch to Guides.
- Tap + and give the guide a title.
- Add your setup instructions and any reference photos.
- Link it to a Service Type (so it applies automatically to every future service of that type — a recurring Christmas Eve guide, for example) and/or to one specific upcoming service.
A guide linked through its Service Type can still be unlinked from one specific occurrence without affecting any other service of that type — useful for the one year Christmas Eve needs to work differently. Guides also show up directly from the scheduler when someone taps into a service, so your team can pull up the right instructions without leaving the scheduling flow.
Setting Up Checklists
- Go to the Guilds tab, select a guild, and switch to Checklists.
- Tap + to create a new checklist template, then add its items. You can group items under headings (e.g., “Before Service,” “During Service”) if that helps keep a longer checklist organized.
- Optionally assign the checklist to one of the guild’s roles, if your guild maintains more than one checklist for different roles (a separate “Sacred Vessel Care” checklist from “Linen Care,” for example) — this is purely for organizing the list, not for restricting who can fill one out.
- Link it to a Service Type and/or specific services the same way you would a Guide.
Unlike a Guide, a Checklist isn’t just displayed — each time someone opens it for a real, upcoming service, Zita creates a fresh copy of it for that specific service, and every item stays checked off (or skipped) as a permanent record for that occurrence. Any active member of the guild can fill one out, not just leads and admins.
Part 8 — Send Invitations (Super Admin only)
With your people added and your guilds set up, it’s time to invite everyone to join Zita. Only the Super Admin can send invitations — this is a restriction of Apple’s iCloud sharing system, not a Zita setting, so it can’t be delegated. If you’re an Admin, ask your Super Admin to send invitations once you’ve finished adding people.
How Invitations Work
When the Super Admin taps Send Invite from a person’s record, Zita opens your email app with a pre-written message addressed to that person. The email contains a share link and two short steps: install Zita if they don’t already have it, then tap the link and open Zita — Zita finishes setting up their account automatically from there.
On the recipient’s end: they open the invitation email and tap the link. Their device opens Zita (after installing it from the App Store, if needed), connects them to your church, and matches them to their person record automatically. This usually happens right away, but it can take up to 30 seconds while it syncs. If Zita can’t match them automatically (for example, the invitation was accepted with a different email address), they’ll see a short “Almost there” screen while Zita asks your admins to connect them. Any admin can do that from Admin → Needs Linking. If the link doesn’t open Zita, they can also paste the invitation link on Zita’s welcome screen.
Before You Send
A person must have an email address on their record before you can send them an invitation. If the Send Invite button is disabled, check that their email address is filled in.
Everyone who uses Zita needs a Mac, iPhone, or iPad signed in to iCloud. That’s how Zita securely shares and syncs your church’s data. Most people already are. It’s worth mentioning before invitations go out, so anyone who isn’t can get set up in advance.
Sending an Invitation
- Go to Admin → People.
- Tap the person you want to invite.
- In the Permissions & Status section, tap Send Invite.
- Your email app will open with the invitation pre-written. Review it and send.
- Zita will mark the person’s invite status as Invited once the invitation has been initiated.
Invitation Status
Each person’s record shows their current invite status:
- Not Invited — no invitation has been sent yet.
- Invited — an invitation has been sent but they haven’t linked their account yet.
- Linked — they’ve accepted the invitation and Zita has connected them to their person record. They have full access to Zita.
Resending an Invitation
If someone didn’t receive their invitation, lost the email, or their invite seems stuck, you can resend it. Tap Resend on their person record. This clears their old invitation and sends a fresh one.
Who to Invite First
There’s no required order, but it’s worth starting with your guild leads. They’ll be doing the scheduling work once they’re in, and getting them linked early means you can hand off scheduling as soon as you’re ready.
Your Admin colleagues should be invited early as well — they’ll need access to start managing services and people alongside you.
Members can be invited at any time, including after scheduling has already begun.
You’re Set Up
If you’ve worked through Parts 1–7, your church is ready to go in Zita:
- Your services are in the system with accurate mass types, vestment colors, and times.
- Your guilds and roles are configured.
- Your people are added and assigned to their roles.
- Invitations are on their way.
From here, the work shifts from setup to ongoing management.
For Admins — the Zita Administration Guide covers what’s worth knowing before you need it: permissions, what can and can’t be undone, recovering a church’s data, and managing your subscription.
For Guild Leads and Members — Zita works the way you’d expect from any Apple app: open the Scheduling tab to see assignments and self-schedule to roles you belong to, and use My Info to mark yourself unavailable or request a sub. No guide needed to get started. If anything doesn’t behave the way you expect, ask in our Facebook group — chances are someone’s already asked.
